Get aCC_e55

First Room - Workshop


First Room - Workshop
Get aCC_e55 Guide


Last Updated:
To start the game you find yourself in a workshop. You can tap the lightbulb in the top right to get some background to the game. You objective is to collect parts for the T9 string engine and other parts for the car.
First Room - Workshop
On a top shelf you will see a gold trophy item. you can tap this to see your achievements in the game.

Lift tool
On the work bench closest to you next to the vice is a magazine, tap this to to see the option to get a lift tool item. This is an in game purchase and will give you a tool that you need to use later. It also unlocks the full game removing any adverts. You do not need to buy this to complete the game but it will save you some time and as a small purchase will help the game developers.
First Room - Workshop

Tap on the drawing board to view the diagrams, there are some hints here to help with future puzzles and you will be returning to check it. Slide your finger on the screen to rotate the board and look behind it. There is a clue _ _ 3 _Show
First Room - Workshop

You can tap the computer to view it and you can take a drink of the coffee.

Tap the work bench to the left of the computer to view it, then tap to collect the the screwdriver on the left.

Use the screwdriver on the blue box on the bench to open the lid. Collect a Red Button from inside.
First Room - Workshop

Tap the left arrow to rotate the room and view some shelves on the side. On the left of the middle shelf is a Free tool prototype. This is an alternative to paying for the full game to unlock the lift tool. You can use this free tool to watch 10 adverts and get the lift tool that you need later. You may not be able to watch all the adverts in one go.
First Room - Workshop

On the second shelf from the bottom tap the center box to move it and find a crowbar to collect behind it.

Rotate the view again to see the large roll up door.

To the right is a control switch but the button is missing. Use the red button that you have found here to add it. You can now open the door.

Once opened you can exit into the courtyard. You can return here though when needed.

Cartridge
An optional item in the game, this is found below the below lock box on the wall. Tap on the small grey grate by the floor in the corner and use the crowbar on it top open it. Collect from inside the Arcade machine Polybius cartridge.
First Room - Workshop




Bolt Cutters
Once you have collected a key with key chain from the bar you can return here and tap on the blue lock box on the wall to the right of the door under the Home sign.
Use the key here to open it and collect the Bolt Cutter.
First Room - Workshop
Use these in the Courtyard




Orange valve
Once you have been to the basement return here and rotate the view to see the back of the workbench. Under the sink collect the orange steam valve.
First Room - Workshop




Fuel Cell
After you have access and powered up the laboratory you will return to the workshop to make a fuel cell.
You will need to have collected several items to do this.

Tap on the workbench to the left of the computer to view the work area with the chemicals
First Room - Workshop

First place the housing of the T9 engine (found in room 103) on the bench where the blue area is displayed.
Next collect the empty flask on the bench to the right.

Back up and use the flask on the sink to the right to fill it with water.
First Room - Workshop

Return to the work bench. Use the empty capsule (from the vending machine in the porch) on the small device in front of the test tubes to place it there. Next use the water in the flak on the capsule to fill it and then use the HM2N2K from the laboratory on the capsule to add it to the water.

You can now collect the Capsule with fuel reagent. Once you have this return to the Laboratory.
First Room - Workshop




Fuel Conventor
Once you have received this item by activating the portal in the Laboratory you can return here and place it into the engine assembly on the workbench. After this you need to add more engine parts. If you haven't found them yet you can now go back to the elevator in the porch and access room 588 or room 637.
First Room - Workshop




Jet Converter
Once you have received this item from the machine in room 637 you can return here and place it into the engine assembly on the workbench after the items above. After this you need to add more engine parts. If you haven't found them yet you can now go back to the elevator in the porch and access room 588.




Controller of T9 engine
Once you have collected this item you can return here and place it into the engine assembly on the workbench after the items above.. After this you need to add more engine parts. If you haven't found them yet you can now go back to the elevator in the porch and access room 412, the delivery area.





Engine housing cover
Once you have the engine housing cover from the delivery landing pad you can return here and place it onto the engine assembly on the workbench after the items above. After this you need to add the final part, the intake valve which is found in




Intake Valve
Once the engine is assembled you can collect the completed T9 engine and take it to the garage to add it to the car.

First Room - Workshop





We have questions and answers related to this topic which may also help you: Show all

 

Comments & Replies

  • AppGamer
  • Facebook
  • Disqus

You can comment on the page with Disqus or Facebook. Choose either above to see what others have said.

 
 
ADD YOUR REVIEW
Your Rating:
 
GAME RATING
 
 
Game Guides